ipex RF cable assembly is a combination of RF coaxial connectors and flexible cables or semi-rigid and semi-flexible cables. It is widely used in microwave equipment and digital communication equipment. In rfid systems, it also needs A large number of RF cable assemblies, such as the connection between the reader and the antenna.

At present, most of the methods for inserting ipex terminals on the market are to use the threads on the male and female heads. The installation of the terminals can only be completed by rotating the male head to the female head. There are also bayonet-type installations, which require a certain cost It takes time and is inconvenient to plug the ipex terminal, which affects the work efficiency. Therefore, an ipex terminal coaxial antenna assembly that is convenient to plug is urgently needed.

IPEX belongs to the technical field of electronic assembly, in particular to an IPEX terminal coaxial antenna assembly that is easy to plug and connect, comprising a female header seat and a male header seat inserted inside the female header seat, and the outer wall of the female header seat There are two symmetrical limit plates, the two limit plates are rotatably connected with the female head seat through a rotating shaft, and the outer wall of the male head seat is provided with two second recesses corresponding to the limit plates The top of the female header seat has a positioning plate, and the positioning plate is provided with two symmetrical installation grooves; through the male header seat and the female header seat, after the female header seat and the male header seat are plugged together, the card The block can be locked in the slot under the action of the spring, and the limit plate rotates into the second groove, so that the male header and the female header cannot rotate with each other, and the insertion of the IPEX terminal is completed. This setting structure is simple , It is easy to operate, can quickly complete the insertion of IPEX terminals, and is stable and reliable after installation, which can improve the effect of using IPEX terminals.

The external antenna of the IPEX interface is the Cable Feeding independent antenna. Its advantages are: better control of the field pattern, low insertion loss, good directionality of the signal, high efficiency, strong anti-interference ability, and can be far away from the interference on the main board , and there is no need for too much debugging and matching. As a terminal manufacturer, you only need to connect an IPEX antenna outside. Of course, there are also disadvantages: high cost and troublesome assembly.